A range of uniquely powerful Invisible Speaker Audio Drives the' F-drive' system can be used to convert new and existing architectural structures and solid surfaces into high quality loudspeakers, particularly for home entertainment, public buildings, transport industry and marine environment.

The F-drives is changing they way architects, audio designers and consumers solve acoustic problems.Some benefits of the F-drives- Highly intelligible distributed mode (non-directional) speakers.

- Satisfying the EN60849 standard for acoustic quality in public places
- Moisture proof

Unlike in-wall invisible 'plaster' speakers which can be prone to cracking plaster when played loud, the F-Drive is unique and does not suffer the same flaws Invisible audio The ‘F-Drive' is the key component in the studioAV ‘Invisible Sound' and ‘Media Wall' products, and is also suitable for embedded audio in floors, listed buildings and other situations where an unobtrusive audio system is required.

Transport systems The ‘F-Drive' is also equally well suited to use in bus and train interiors, and to boats where its high resistance to moisture damage ensures a long service life under harsh conditions.

The ‘F-Drive' is unlike traditional speaker technology because it uses a very high powered magnetostrictive smart material as the driver instead of a moving coil. The material was originally developed by the US military for sonar applications and is now derestrictedfor commercial use.

Demonstrating now at our three demonstration suites. Contact us or alternatively arrange a booking with us using the form provided and we shall get back to you.

Key Features
• Wide frequency bandwidth
• Robust technology with long service life
• No speaker grilles or apertures required
• Wide temperature range
• Impervious to moisture damage
S-Drive
With the same benefits as the F Drive, the S Drive provides low frequency capabilities to two channel and 5 channel cinema installations normally associated with a large sub woofer box. The S Drive can be discreetly installed and requires a power amplifier to drive. Technical Specification (F-S): Impedance: 4 Ohms Frequency response: 20Hz – 200Hz Power rating: 50 Watts (runs off sub-woofer amplifiers with a minimum of 50W power rating) Product dimensions: Diameter 162mm (max) x height 58mm Mounting hole diameter: 4.2mm Mounting hole spacing: 101.6mm (4”) square.

F-drive & S-Drive Technical Specifications - please contact us for further information.